Rena DA615 Manual de instrucciones descargar pdf (Pagina 11)

DA615 Operations Manual 3 Rev. 3/23/00

Selecting the Paper Transport Direction (Valid for DA615 S/N 130 or Lower!)

For DA615 S/N 131 or higher, please see the following page!

Using the Paper Transport Direction Switch (8), the DA615 can be set to feed material from left to right, or from right

to left (D), as shown below. This switch (8) is only recognised by the DA615 during power up.

NOTE: There is also a menu selection “Transp. Direct.” which can be used to change the paper feed direction,

after the printer has been powered on. This setting will be over-ridden, once the DA615 is powered off and on

again. To make your paper feed direction choice permanent; make sure you set the switch (8) correctly.

The Paper Transport Direction Switch (8) is only recognized during

initial power up of the DA615. If this switch (8) is changed after the

printer is powered on, the printer will not respond to the change, until

the printer is powered off and on again.

Feed Direction

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 53 54

Sin comentarios

Rena DA615 Manual de instrucciones Pagina 11